[Contents] [Prev] [Next] [Index] [Report an Error]

optimize-timer

Syntax



optimize-timer seconds;

Hierarchy Level



[edit logical-systems logical-system-name protocols mpls],
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name (primary | secondary)],
[edit protocols mpls],
[edit protocols mpls label-switched-path lsp-name],
[edit protocols mpls label-switched-path lsp-name (primary | secondary) path-name]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Enable periodic reoptimization of an LSP that is already set up. If topology changes occur, an existing path might become suboptimal, and a subsequent recomputation might be able to determine a better path. This option is useful only on LSPs for which constrained-path computation is enabled; that is, for which the no-cspf statement is not configured.

To avoid extensive resource consumption that might result because of frequent path recomputations, or to avoid destabilizing the network as a result of constantly changing LSPs, we recommend that you either leave the timer value sufficiently large or disable the timer value.

Default

The optimize timer is disabled.

Options

seconds—Length of the optimize timer, in seconds.

Usage Guidelines

See Optimizing Signaled LSPs.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]