 |
Note: You cannot configure families on CCC interfaces; that is, you cannot include the family statement at the [edit interfaces interface-name unit logical-unit-number] hierarchy level. |
To configure Layer 2 switching cross-connects, configure the CCC encapsulation on the router that is acting as the switch (Router B in Figure 27).
|
Note: You cannot configure families on CCC interfaces; that is, you cannot include the family statement at the [edit interfaces interface-name unit logical-unit-number] hierarchy level. |
You can configure the following encapsulations for the Layer 2 switching cross-connect:
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |