[Contents] [Prev] [Next] [Index] [Report an Error]

Defining the CCC Connection for LSP Tunnel Cross-Connects

To configure LSP tunnel cross-connects, include the remote-interface-switch statement to define the connection between the two circuits on the ingress and egress routers (Router B and Router C, respectively, in Figure 30). The connection joins the interface or LSP that comes from the circuit’s source to the interface or LSP that leads to the circuit’s destination. When you specify the interface name, include the logical portion of the name, which corresponds to the logical unit number. For the cross-connect to be bidirectional, you must configure cross-connects on two routers.




remote-interface-switch connection-name { 
interface interface-name.unit-number;
transmit-lsp label-switched-path;
receive-lsp label-switched-path;
}

You can include these statements at the following hierarchy levels:

[edit protocols connections]
[edit logical-systems logical-system-name protocols connections]

[Contents] [Prev] [Next] [Index] [Report an Error]