Configuring CCC Switching for Point-to-Multipoint LSPs

You can configure CCC to switch traffic from interfaces to point-to-multipoint LSPs. This feature is useful for handling multicast or broadcast traffic (for example, a digital video stream).

To configure CCC switching for point-to-multipoint LSPs, you do the following:

• On the ingress provider edge (PE) router, you configure CCC to switch traffic from an incoming interface to a point-to-multipoint LSP.
• On the egress PE, you configure CCC to switch traffic from an incoming point-to-multipoint LSP to an outgoing interface.

The CCC connection for point-to-multipoint LSPs is unidirectional.

For more information on point-to-multipoint LSPs, see Point-to-Multipoint LSPs and Point-to-Multipoint LSP Configuration Guidelines.

To configure a CCC connection for a point-to-multipoint LSP, complete the steps in the following sections:

• Configuring the Point-to-Multipoint LSP Switch on the Ingress PE Router
• Configuring the Point-to-Multipoint LSP Switch on the Egress PE Router

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.