[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Automatic Policers for LSPs

To configure automatic policers for standard LSPs (neither DiffServ-aware traffic engineered LSPs nor multiclass LSPs), include the auto-policing statement with either the class all policer-action option or the class ct0 policer-action option:




auto-policing {
class all policer-action;
class ct0 policer-action;
}

You can include this statement at the following hierarchy levels:

[edit protocols mpls]
[edit logical-systems logical-system-name protocols mpls]

You can configure the following policer actions for automatic policers:

drop—Drop all packets.
loss-priority-high—Set the packet loss priority (PLP) to high.
loss-priority-low—Set the PLP to low.

These policer actions are applicable to all types of LSPs. The default policer action is to do nothing.

Note: You cannot configure automatic policers for LSPs that traverse aggregated interfaces or Multilink Point-to-Point Protocol (MLPPP) interfaces.

[Contents] [Prev] [Next] [Index] [Report an Error]