[Contents] [Prev] [Next] [Index] [Report an Error]

associate-backup-pe-groups

Syntax



associate-backup-pe-groups;

Hierarchy Level



[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name],
[edit protocols mpls label-switched-path lsp-name]

Release Information

Statement introduced in JUNOS Release 9.0.

Description

Enable an LSP to monitor the status of its destination PE router. You can configure multiple backup PE router groups using the same router's address. Backup PE router groups provide ingress PE router redundancy when point-to-multipoint (P2MP) LSPs are configured for multicast distribution. A failure of this LSP indicates to all of the backup PE router groups that the destination PE router is down. This statement is not tied to a specific backup PE router group. It applies to all groups that are interested in the status of the LSP to the destination address.

Usage Guidelines

See Binding Point-to-Point LSPs to PE Routers and Backup PE Router Groups.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]