Configuring Spanning-Tree Protocols

This chapter describes how you can configure the various versions of the Spanning Tree Protocol (STP) supported on MX-series routers to create a loop-free topology in Layer 2 networks.

• Spanning-Tree Protocols Overview
• Configuring the Rapid Spanning Tree Protocol
• Configuring the Multiple Spanning Tree Protocol
• Configuring the VLAN Spanning Tree Protocol
• Configuring Layer 2 Protocol Tunneling
• Configuring Layer 2 Control BPDU Protection
• Configuring STP Loop Protection

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.