[Contents] [Prev] [Next] [Index] [Report an Error]

Modifying the Advertisement Interval in Milliseconds

To modify the time, in milliseconds, between the sending of VRRP advertisement packets, include the fast-interval statement at either of the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number family (inet | inet6) address address (vrrp-group | vrrp-inet6-group) group-id]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family (inet | inet6) address address (vrrp-group | vrrp-inet6-group) group-id]



 
fast-interval milliseconds;

The interval can be from 100 through 999 milliseconds.

Note: In the VRRP PDU, the JUNOS software sets the advertisement interval to 0. When you configure VRRP with other vendors’ routers, the fast-interval statement works correctly only when the other routers also have an advertisement interval set to 0 in the VRRP PDUs. Otherwise, the JUNOS software interprets other routers’ settings as advertisement timer errors.

To modify the time, in milliseconds, between the sending of VRRP for IPv6 advertisement packets, include the inet6-advertise-interval statement at either of the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id]




inet6-advertise-interval ms;

The range of values is from 100 through 40,950 milliseconds (ms).

[Contents] [Prev] [Next] [Index] [Report an Error]