Upgrading an M- or T-series Router to Common Criteria

To upgrade a Juniper Networks M- and T-series router running JUNOS software to JUNOS Common Criteria, perform the following tasks in the order listed:

• Download the correct JUNOS Release 8.1 software package and MD5 or SHA1 hash file from www.juniper.net. The J-web User Interface Package can be downloaded and installed as well. The packages and hash values for Common Criteria are listed in Table 7 and Table 8.
• Connect locally to the active Routing Engine console port.
• Copy the JUNOS software to both Routing Engines if applicable.
• Upgrade using the request system software add reboot jinstall-8.1R1.5-domestic-signed.tgz command. For more details about adding system software, see the JUNOS System Basics Configuration Guide.
  • When upgrading from JUNOS Release 6.4, you should use the no-validate option on the supported JUNOS Release 8.1 software modules. You can validate upgrades to supported JUNOS Release 8.1 modules from JUNOS Release 7.x. Upgrade to supported JUNOS Release 8.1 modules from JUNOS Release 6.4 using the request system software add reboot no-validate jinstall-8.1R1.5-domestic-signed.tgz command.

Table 7: Common Criteria JUNOS Software for 8.1R1.5

Table 8: Common Criteria JUNOS Software for 8.1R3.3

For more details about adding the J-Web User Interface Package software, and when to use jbundle or jinstall, see the JUNOS System Basics Configuration Guide.

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.