[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
if-exceeding
Syntax
- if-exceeding {
- bandwidth-limit rate;
- bandwidth-percent number;
- burst-size-limit bytes;
- }
Hierarchy Level
- [edit firewall policer policer-name]
Release Information
Statement introduced before JUNOS Release
7.4.
Description
Configure policer rate limits.
Options
-
bandwidth-limit bps—Traffic rate, in bits per second (bps). There is no minimum
value, but any value below 61,040 bps results in an effective
rate of 30,520 bps.
-
Range: 32,000 through 32,000,000,000 bps
-
Default: None
-
bandwidth-percent number—Port
speed, in decimal percentage number.
-
Range: 1 through 100
-
Default: None
-
burst-size-limit bytes—Maximum
burst size, in bytes. The minimum recommended value is the maximum
transmission unit (MTU) of the IP packets being policed.
-
Range: 1500 through 100,000,000 bytes
-
Default: None
 |
Note:
On the M320, M120, MX-series, and T-series routing platforms,
you can specify a minimum bandwidth limit of 8k (8000 bps).
|
Usage Guidelines
See Classifying Packets Based on Multiple Fields, Setting the PLP with a Multifield Classifier, and Configuring Strict-High Priority on J-series Platforms; for a general discussion
of this statement, see the JUNOS Policy Framework Configuration Guide.
Required Privilege Level
firewall—To view this statement
in the configuration.
firewall-control—To add this statement to
the configuration.
Related Topics
filter (Configuring), priority (Schedulers)
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
