[Contents] [Prev] [Next] [Index] [Report an Error]

[edit firewall] Hierarchy Level

The following CoS statements can be configured at the [edit firewall] hierarchy level. This is not a comprehensive list of statements available at the [edit firewall] hierarchy level. Only the statements documented in this manual are listed here. For more information about firewall configuration, see the JUNOS Policy Framework Configuration Guide.



[edit firewall]

three-color-policer policer-name {



action {
loss-priority high then discard;
}



logical-interface-policer;


single-rate {
(color-aware | color-blind);
committed-information-rate bps;
committed-burst-size bytes;
excess-burst-size bytes;
}




two-rate {
(color-aware | color-blind);
committed-information-rate bps;
committed-burst-size bytes;
peak-information-rate bps;
peak-burst-size bytes;
}





family family-name {



filter filter-name {



term term-name {


from {

match-conditions;
}




then {

dscp 0;

forwarding-class class-name;

loss-priority (high | low);

virtual-channel virtual-channel-name;



three-color-policer {
(single-rate | two-rate) policer-name;
}


}


}


}





simple-filter filter-name {



term term-name {


from {

match-conditions;
}




then {

forwarding-class class-name;

loss-priority (high | low | medium);
}


}


}


}





policer policer-name {

logical-bandwidth-policer;



if-exceeding {
bandwidth-limit rate;
bandwidth-percent number;
burst-size-limit bytes;
}




then {

policer-action;
}


}


}

[Contents] [Prev] [Next] [Index] [Report an Error]