Testing ex-clocking-error.xsl

To test the example in this section, perform the following steps:

1. From Requiring Internal Clocking on T1 Interfaces, copy the Extensible Stylesheet Language Transformations (XSLT) or SLAX script into a text file, and name the file ex-clocking-error.xsl. Copy the ex-clocking-error.xsl file to the /var/db/scripts/commit directory on your routing platform.
2. Select the following configuration, and press Ctrl+c to copy it to the clipboard. If you are using the SLAX version of the script, change the filename to filename.slax.

   system {
       scripts {
           commit {
               file ex-clocking-error.xsl;
           }
       }
   }
   interfaces {
       t1-0/0/0 {
           clocking external;
       }
       t1-0/0/1 {
           unit 0;
       }
   }
   
   

3. Merge the configuration into your routing platform configuration by issuing the load merge terminal configuration mode command:

   [edit]

   user@host# load merge terminal

   [Type ^D at a new line to end input]

   > Paste the contents of the clipboard here<

   1. At the prompt, paste the contents of the clipboard using the mouse and the paste icon.
   2. Press Enter.
   3. Press Ctrl+d.
4. Issue the commit command. When you issue the commit command, the following output appears:

   [edit]
   user@host# commit
   
   [edit interfaces interface t1-0/0/0]
    'clocking external;'
     This T1 interface should have internal clocking.
   [edit interfaces interface t1-0/0/1]
    ';'
     This T1 interface should have internal clocking.
   error: 2 errors reported by commit scripts
   error: commit script failure

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.