[Contents] [Prev] [Next] [Index] [Report an Error]

show route label

Syntax

show route label label
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display the routes based on a specified Multiprotocol Label Switching (MPLS) label value.

Options

label — Value of the MPLS label.

brief | detail | extensive | terse — (Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show route label
show route label detail
show route label extensive
show route label terse

Output Fields

For information about output fields, see the show route command (Table 93), the show route detail command (Table 96), the show route extensive command (Table 102), or the show route terse command (Table 110). The Ref Cnt field name in the show route label command is equivalent to the Reference Count field displayed in the show route command.

Sample Output

show route label

user@host> show route label 100016 
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
100016             *[VPN/170] 03:25:41
                    > to 10.12.80.1 via ge-6/3/2.0, Pop

show route label detail

user@host> show route label 100016 detail 
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
Restart Complete
100016 (1 entry, 1 announced)
        *VPN    Preference: 170
                Next-hop reference count: 2
                Source: 10.12.80.1
                Next hop: 10.12.80.1 via ge-6/3/2.0, selected
                Label operation: Pop      
                State: <Active Int Ext>
                Local AS:     1 
                Age: 3:23:31 
                Task: BGP.0.0.0.0+179
                Announcement bits (1): 0-KRT 
                AS path: 100 I
                Ref Cnt: 2

show route label extensive

The output for the show route label extensive command is identical to that of the show route label detail command. For sample output, see show route label detail.

show route label terse

user@host> show route label 100016 terse 
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both

A Destination        P Prf   Metric 1   Metric 2  Next hop        AS path
* 100016             V 170                       >10.12.80.1
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.