show pim neighbors

none — (Same as brief) Display standard information about PIM neighbors for all supported family addresses for all routing instances on all logical systems.

inet | inet6 — (Optional) Display information about PIM neighbors for IPv4 or IPv6 family addresses, respectively.

instance instance-name — (Optional) Display information about neighbors for the specified PIM-enabled routing instance.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

List of Sample Output

Output Fields

Table 61 describes the output fields for the show pim neighbors command. Output fields are listed in the approximate order in which they appear.

Sample Output

Field Name	Field Description	Level of Output
Instance	Name of the routing instance.	All levels
Interface	Interface through which the neighbor is reachable.	All levels
Neighbor addr	Address of the neighboring PIM router.	All levels
IP	IP version: 4 or 6.	All levels
V	PIM version running on the neighbor: 1 or 2.	All levels
Mode	PIM mode of the neighbor: Sparse, Dense, SparseDense, or Unknown. When the neighbor is running PIM version 2, this mode is always Unknown.	All levels
Option	Can be one or more of the following: B—Bidirectional Capable. H—Hello Option Holdtime. G—Generation Identifier. P—Hello Option DR Priority. L—Hello Option LAN Prune Delay.	brief none
Uptime	Time the neighbor has been operational since the PIM process was last initialized, in the format dd:hh:mm:ss ago for less than a week and nwnd:hh:mm:ss ago for more than a week.	All levels
Address	Address of the neighboring PIM router.	detail
BFD	Status and operational state of the Bidirectional Forwarding Detection (BFD) protocol on the interface: Enabled, Operational state is up, or Disabled.	detail
Hello Option Holdtime	Time for which the neighbor is available, in seconds. The range of values is 0 through 65,535.	detail
Hello Option DR Priority	Designated router election priority. The range of values is 0 through 255.	detail
Hello Option Generation ID	9- or 10-digit number used to tag hello messages.	detail
Hello Option LAN Prune Delay	Time to wait before the neighbor receives prune messages, in the format delay nnn ms override nnnn ms.	detail
Join Suppression supported	Neighbor is capable of join suppression.	detail
Rx Join	Information about joins received from the neighbor. Group—Group addresses in the join message. Source—Address of the source in the join message. Timeout—Time for which the join is valid.	detail

user@host> show pim neighbors

Instance: PIM.master
B = Bidirectional Capable, G = Generation Identifier,
H = Hello Option Holdtime, L = Hello Option LAN Prune Delay,
P = Hello Option DR Priority

Interface           IP V Mode        Option      Uptime Neighbor addr
so-1/0/0.0           4 2             HPLG      00:07:10 10.111.10.2

show pim neighbors brief

The output for the show pim neighbors brief command is identical to that for the show pim neighbors command. For sample output, see show pim neighbors.

show pim neighbors instance

user@host> show pim neighbors instance VPN-A

Instance: PIM.VPN-A
B = Bidirectional Capable, G = Generation Identifier,
H = Hello Option Holdtime, L = Hello Option LAN Prune Delay,
P = Hello Option DR Priority

Interface           IP V Mode        Option      Uptime Neighbor addr
at-0/3/1.0           4 2             HPLG      00:07:54 10.111.30.2
mt-1/1/0.32768       4 2             HPLG      00:07:22 10.10.47.101
so-1/0/1.0           4 2             HPLG      00:07:50 10.111.20.2

show pim neighbors detail

user@host> show pim neighbors detail

Instance: PIM.master
Interface: fe-3/0/2.0
     Address: 192.168.195.37, IPv4, PIM v2, Mode: Sparse
 Hello Option Holdtime: 65535 seconds
 Hello Option DR Priority: 1
 Hello Option LAN Prune Delay: delay 500 ms override 2000 ms
                               Join Suppression supported
 Rx Join: Group           Source          Timeout
          225.1.1.1       192.168.195.78        0
          225.1.1.1                             0
Interface: lo0.0
     Address: 10.255.245.91, IPv4, PIM v2, Mode: Sparse
 Hello Option Holdtime: 65535 seconds
 Hello Option DR Priority: 1
 Hello Option LAN Prune Delay: delay 500 ms override 2000 ms
                               Join Suppression supported
Interface: pd-6/0/0.32768
     Address: 0.0.0.0, IPv4, PIM v2, Mode: Sparse
 Hello Option Holdtime: 65535 seconds
 Hello Option DR Priority: 0
 Hello Option LAN Prune Delay: delay 500 ms override 2000 ms
                               Join Suppression supported

show pim neighbors detail (with BFD)

user@host> show pim neighbors detail

Instance: PIM.master
Interface: fe-1/0/0.0
    Address: 192.168.11.1,        IPv4, PIM v2, Mode: Sparse
        Hello Option Holdtime: 65535 seconds
        Hello Option DR Priority: 1
        Hello Option Generation ID: 836607909
        Hello Option LAN Prune Delay: delay 500 ms override 2000 ms

    Address: 192.168.11.2,        IPv4, PIM v2
        BFD: Enabled, Operational state is up
        Hello Option Holdtime: 105 seconds 104 remaining
        Hello Option DR Priority: 1
        Hello Option Generation ID: 1907549685
        Hello Option LAN Prune Delay: delay 500 ms override 2000 ms

Interface: fe-1/0/1.0
    Address: 192.168.12.1,        IPv4, PIM v2
        BFD: Disabled
        Hello Option Holdtime: 105 seconds 80 remaining
        Hello Option DR Priority: 1
        Hello Option Generation ID: 1971554705
        Hello Option LAN Prune Delay: delay 500 ms override 2000 ms

show pim neighbors

Syntax

Release Information

Description

Options

Required Privilege Level

List of Sample Output

Output Fields

Sample Output

show pim neighbors

show pim neighbors brief

show pim neighbors instance

show pim neighbors detail

show pim neighbors detail (with BFD)