- show multicast scope
- <inet | inet6>
- <instance instance-name>
- <logical-system (all | logical-system-name)>
Command introduced before JUNOS Release 7.4.
Display administratively scoped IP multicast information.
none — Display standard information about administratively scoped multicast information for all supported address families in all routing instances on all logical systems.
inet | inet6 — (Optional) Display scoped multicast information for IPv4 or IPv6 family addresses, respectively.
instance instance-name — (Optional) Display administratively scoped information for a specific multicast instance.
logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.
view
Table 47 describes the output fields for the show multicast scope command. Output fields are listed in the approximate order in which they appear.
Table 47: show multicast scope Output Fields
user@host> show multicast scope
Resolve Scope name Group Prefix Interface Rejects 232-net 232.232.0.0/16 fe-0/0/0.1 0 local 239.255.0.0/16 fe-0/0/0.1 0 local ff05::/16 fe-0/0/0.1 0 larry ff05::1234/128 fe-0/0/0.1 0
user@host> show multicast scope inet
Resolve Scope name Group Prefix Interface Rejects 232-net 232.232.0.0/16 fe-0/0/0.1 0 local 239.255.0.0/16 fe-0/0/0.1 0
user@host> show multicast scope inet6
Resolve Scope name Group Prefix Interface Rejects local ff05::/16 fe-0/0/0.1 0 larry ff05::1234/128 fe-0/0/0.1 0