- show msdp source
- <instance instance-name>
- <logical-system (all | logical-system-name)>
- <source-address>
Command introduced before JUNOS Release 7.4.
Display multicast sources learned from Multicast Source Discovery Protocol (MSDP).
none — Display standard MSDP source information for all routing instances on all logical systems.
instance instance-name — (Optional) Display information for the specified instance only.
logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.
source-address — (Optional) IP address and optional prefix length. Display information for the specified source address only.
view
Table 38 describes the output fields for the show msdp source command. Output fields are listed in the approximate order in which they appear.
Table 38: show msdp source Output Fields
user@host> show msdp source
Source address /Len Type Maximum Threshold Exceeded 0.0.0.0 /0 Configured 5 none 0 10.1.0.0 /16 Configured 500 none 0 10.1.1.1 /32 Configured 10000 none 0 10.1.1.2 /32 Dynamic 6936 none 0 10.1.5.5 /32 Dynamic 500 none 123 10.2.1.1 /32 Dynamic 2 none 0