[Contents] [Prev] [Next] [Index] [Report an Error]

show mpls diffserv-te

Syntax



show mpls diffserve-te
<logical-system (all | logical-system-name)>

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display Multiprotocol Label Switching (MPLS) label-switched path (LSP) Differentiated Services (DiffServ) class and preemption priority information.

Options

none — Display DiffServ classes and priorities used by MPLS LSPs on all logical systems.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show mpls diffserv-te

Output Fields

Table 151 describes the output fields for the show mpls diffserv-te command. Output fields are listed in the approximate order in which they appear.

Table 151: show mpls diffserv-te Output Fields

Field Name	Field Description
Bandwidth model	Bandwidth constraint model supported. The maximum allocation model (MAM) for EXP-inferred LSPs (E-LSPs) is currently supported.
TE class	DiffServ traffic engineering class.
Traffic class	MPLS class type that corresponds to the DiffServ traffic engineering class: ct0—Best effort ct1—Assured forwarding ct2—Expedited forwarding ct3—Network control
Priority	MPLS preemption priority for this class type, a value from 0 through 7. Interior gateway protocols (IGPs) distribute information about the available bandwidth for each traffic engineering class.

Sample Output

show mpls diffserv-te

user@host> show mpls diffserv-te

Bandwidth model: Maximum Allocation Model with support for E-LSPs.
TE class     Traffic class       Priority
te0          ct0                 3
te1          ct1                 2

[Contents] [Prev] [Next] [Index] [Report an Error]