show ancp subscriber

Display information about all subscribers (local access loops), the identified subscriber, or the subscriber associated with the specified ANCP neighbor (access node).

Options

brief | detail | extensive | terse — (Optional) Display the specified level of detail.

identifier identifier — (Optional) Display information about the subscriber specified by the access identifier.

neighbor ip-address — (Optional) Display information about the local loops connected to the specified access node.

Required Privilege Level

List of Sample Output

Output Fields

Table 10 lists the output fields for the show ancp subscriber command. Output fields are listed in the approximate order in which they appear.

Sample Output

Field Name	Field Description
Loop Identifier	Access loop identifier as sent by the access node and configured to map the subscriber to an interface.
Type	Type of digital subscriber line employed by the access node: ADSL1, ADSL2, ADSL2+, VDSL1, VDSL2, SDSL, or UNKNOWN.
State	State of the DSL line: Idle, Show Time, or Silent.
Rate Kbps	Actual downstream data rate for this local loop.
Neighbor	IP address of ANCP neighbor (access node).
Access Node Identifier	Access node identifier as sent by the access node and configured to map the subscriber to an interface.
Neighbor IP Address	IP address of the ANCP neighbor (access node).
Aggregate Circuit Identifier Binary	Binary identifier for the VLAN circuit ID.
DSL Type	Type of digital subscriber line employed by the access node: ADSL1, ADSL2, ADSL2+, VDSL1, VDSL2, SDSL, or UNKNOWN.
Interface Type	Type of interface employed for subscriber traffic; only interface-set (a configured group of VLANs) is currently supported.
Interface	Name of the interface set.
DSL Line State	State of the DSL line: Idle, Show Time, or Silent.
Actual Net Data Upstream	Actual upstream data rate for this local loop, in Kbps.
Actual Net Data Downstream	Actual downstream data rate for this local loop, in Kbps
DSL Line Data Link	Data link protocol employed on the access loop: AAL5 or Ethernet
DSL Line Encapsulation	Encapsulation type on the access loop, for Ethernet only: 0—NA, type not conveyed 1—Untagged Ethernet 2—Single-tagged Ethernet
DSL Line Encapsulation Payload	Payload carried across the access loop: 0—NA, type not conveyed 1—PPPoA LLC 2—PPPoA null 3—IPoA LLC 4—IPoA null 5—Ethernet over AAL5 LLC with FCS 6—Ethernet over AAL5 LLC without FCS 7—Ethernet over AAL5 null with FCS 8—Ethernet over AAL5 null without FCS
Minimum Net Data Upstream	Minimum upstream data rate desired by the operator for this local loop, in Kbps.
Minimum Net Data Downstream	Minimum downstream data rate desired by the operator for this local loop, in Kbps.
Maximum Net Data Upstream	Maximum upstream data rate desired by the operator for this local loop, in Kbps.
Maximum Net Data Downstream	Maximum downstream data rate desired by the operator for this local loop, in Kbps.
Attainable Net Data Upstream	Maximum attainable upstream data rate for this local loop, in Kbps
Attainable Net Data Downstream	Maximum attainable downstream data rate for this local loop, in Kbps
Minimum Low Power Data Downstream	Minimum downstream data rate desired by the operator for this local loop in low power state, in Kbps.
Minimum Low Power Data Upstream	Minimum upstream data rate desired by the operator for this local loop in low power state, in Kbps.
Maximum Interleave Delay Downstream	Maximum interleaving delay for downstream data, in milliseconds.
Maximum Interleave Delay Upstream	Maximum interleaving delay for upstream data, in milliseconds.
Actual Interleave Delay Downstream	Actual interleaving delay for downstream data, in milliseconds.
Actual Interleave Delay Upstream	Actual interleaving delay for upstream data, in milliseconds.

show ancp subscriber brief

user@host> show ancp subscriber brief

  Loop Identifier          Type      Interface        Rate          Neighbor
                                                      Kbps
  port-1-10                VDSL2    set-ge-10410       64       10.10.10.2      
  port-1-11                VDSL2    set-ge-10411       64       11.11.11.2      
  port-2-10                VDSL2    set-ge-10412       64       10.10.10.2      
  port-2-11                VDSL2    set-ge-10413       64       11.11.11.2

show ancp subscriber neighbor ip-address detail

user@host> show ancp subscriber neighbor 10.11.11.2
detail

Subscriber Information
      Access Loop Identifier : port-2-11             
          Neighbor IP Address                  : 10.11.11.2            
          Aggregate Circuit Identifier Binary  : 0/0                   
          DSL Type                             :  DSL  0               
          Interface Type                       : interface-set
          Interface                            : set-ge-10413 
          DSL Line State                       : Show Time             
          Actual Net Data Upstream             : 64                    
          Actual Net Data Downstream           : 64                    
          DSL Line Data Link                   : AAL5                  
          DSL Line Encapsulation               : N/A                   
          DSL Line Encapsulation Payload       : N/A                   
          Minimum Net Data Upstream            : 64                    
          Minimum Net Data Downstream          : 64                    
          Maximum Net Data Upstream            : 64                    
          Maximum Net Data Downstream          : 64                    
          Attainable Net Data Upstream         : 64                    
          Attainable Net Data Downstream       : 64                    
          Minimum Low Power Data Downstream    : 64                    
          Minimum Low Power Data Upstream      : 64                    
          Maximum Interleave Delay Downstream  : 50                    
          Maximum Interleave Delay Upstream    : 50                    
          Actual Interleave Delay Downstream   : 50                    
          Actual Interleave Delay Upstream     : 50                    
      Access Loop Identifier : port-1-11             
          Neighbor IP Address                  : 10.11.11.2            
          Aggregate Circuit Identifier Binary  : 0/0                   
          DSL Type                             :  DSL  0               
          Interface Type                       : interface-set             
          Interface                            : set-ge-10411
          DSL Line State                       : Show Time             
          Actual Net Data Upstream             : 64                    
          Actual Net Data Downstream           : 64                    
          DSL Line Data Link                   : AAL5                  
          DSL Line Encapsulation               : N/A                   
          DSL Line Encapsulation Payload       : N/A                   
          Minimum Net Data Upstream            : 64                    
          Minimum Net Data Downstream          : 64                    
          Maximum Net Data Upstream            : 64                    
          Maximum Net Data Downstream          : 64                    
          Attainable Net Data Upstream         : 64                    
          Attainable Net Data Downstream       : 64                    
          Minimum Low Power Data Downstream    : 64                    
          Minimum Low Power Data Upstream      : 64                    
          Maximum Interleave Delay Downstream  : 50                    
          Maximum Interleave Delay Upstream    : 50                    
          Actual Interleave Delay Downstream   : 50                    
          Actual Interleave Delay Upstream     : 50

show ancp subscriber identifier identifier detail

user@host> show ancp subscriber identifier port-1-11
detail


      Access Loop Identifier : port-1-11             
          Neighbor IP Address                  : 10.11.11.2            
          Aggregate Circuit Identifier Binary  : 0/0                   
          DSL Type                             :  DSL  0               
          Interface Type                       : interface-set             
          Interface                            : set-ge-10411
          DSL Line State                       : Show Time             
          Actual Net Data Upstream             : 64                    
          Actual Net Data Downstream           : 64                    
          DSL Line Data Link                   : AAL5                  
          DSL Line Encapsulation               : N/A                   
          DSL Line Encapsulation Payload       : N/A                   
          Minimum Net Data Upstream            : 64                    
          Minimum Net Data Downstream          : 64                    
          Maximum Net Data Upstream            : 64                    
          Maximum Net Data Downstream          : 64                    
          Attainable Net Data Upstream         : 64                    
          Attainable Net Data Downstream       : 64                    
          Minimum Low Power Data Downstream    : 64                    
          Minimum Low Power Data Upstream      : 64                    
          Maximum Interleave Delay Downstream  : 50                    
          Maximum Interleave Delay Upstream    : 50                    
          Actual Interleave Delay Downstream   : 50                    
          Actual Interleave Delay Upstream     : 50

Syntax

Release Information

Description