OSPF Operational Mode Commands

[Contents] [Prev] [Next] [Index] [Report an Error]

Table 79 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot the Open Shortest Path First (OSPF) protocol. Commands are listed in alphabetical order.

Table 79: OSPF Operational Mode Commands

Task	Command
Clear link-state database entries.	clear (ospf \| ospf3) database
Clear OSPF input and output statistics.	clear (ospf \| ospf3) io-statistics
Tear down neighbor connections.	clear (ospf \| ospf3) neighbor
Clear the OSPF overload bit.	clear ospf overload
Clear OSPF statistics.	clear (ospf \| ospf3) statistics
Display link-state database entries for OSPFv2.	show ospf database
Display link-state database entries for OSPFv3.	show ospf3 database
Display OSPF interface status.	show (ospf \| ospf3) interface
Display OSPF input and output statistics.	show (ospf \| ospf3) io-statistics
Display the SPF log.	show (ospf \| ospf3) log
Display adjacent routers.	show (ospf \| ospf3) neighbor
Display overview statistics.	show (ospf \| ospf3) overview
Display OSPF routing table entries.	show (ospf \| ospf3) route
Display OSPF statistics.	show (ospf \| ospf3) statistics

Note: For more OSPF-related commands, such as show route protocol, show route instance, and show route table, see Protocol-Independent Routing Operational Mode Commands. For information about monitoring Bidirectional Forwarding Detection (BFD) sessions for OSPF clients, see BFD Operational Mode Commands. For information about how to configure OSPF, see the JUNOS Routing Protocols Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]