ANCP Operational Mode Commands

[Contents] [Prev] [Next] [Index] [Report an Error]

Table 7 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot Access Node Control Protocol (ANCP) operations. Commands are listed in alphabetical order.

Table 7: ANCP Operational Mode Commands

Task	Command
Clear ANCP neighbors.	clear ancp neighbor
Display ANCP class-of-service information.	show ancp cos
Display ANCP neighbor information.	show ancp neighbor
Display ANCP subscriber information.	show ancp subscriber

Note: For information about how to configure ANCP, see the JUNOS Subscriber Access Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]