VoIP Interface Operational Mode Commands

[Contents] [Prev] [Next] [Index] [Report an Error]

Table 137 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot the Avaya TGM550 VoIP module on J2320, J2350, J4350, and J6350 Services Routers. You can also monitor the Telephony Interfaces Modules (TIMs) to a limited extent. Commands are listed in alphabetical order.

Table 137: VoIP Interface Operational Mode Commands

Task	Command
Remove the Media Gateway Controller (MGC) list configured on the TGM550 module.	clear tgm fpc
Provide a method for user authentication on the TGM550 modules.	request tgm login fpc
Configure the MGC list on the TGM550 module.	set tgm fpc
Display status information about TGM550 modules.	show interfaces (TGM550 Module)
Display dynamic call admission control (CAC) information.	show tgm dynamic-call-admission-control
Display information about TGM550 module connectivity and digital signal processor (DSP) capacity.	show tgm fpc
Display online and offline status of Avaya VoIP Telephony Interface Modules (TIMs).	show tgm telephony-interface-module status

[Contents] [Prev] [Next] [Index] [Report an Error]