[Contents] [Prev] [Next] [Index] [Report an Error]

show interfaces terse

Syntax



show interfaces terse

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display summary information about interfaces.

Options

This command has no options.

Additional Information

Interfaces are always displayed in numerical order, from the lowest to the highest FPC slot number. Within that slot, the lowest PIC slot is shown first. On an individual PIC, the lowest port number is always first.

Required Privilege Level

view

List of Sample Output

show interfaces terse

Output Fields

Table 26 lists the output fields for the show interfaces terse command. Output fields are listed in the approximate order in which they appear.

Table 26: show interfaces terse Output Fields

Field Name	Field Description
Interface	Interface name.
Admin	Whether the interface is turned on (up) or off (down).
Link	Link state: up or down.
Proto	Protocol family configured on the logical interface. A logical interface on a router that supports Ethernet OAM always shows the multiservice protocol.
Local	Local IP address of the logical interface.
Remote	Remote IP address of the logical interface.

Sample Output

show interfaces terse

user@host> show interfaces terse

Interface               Admin Link Proto    Local                 Remote
t1-0/1/0:0              up    up 
t1-0/1/0:0.0            up    up   inet     192.168.220.18/30
t1-0/1/0:1              up    up
t1-0/1/0:2              up    up
t1-0/1/0:3              up    up
at-1/0/0                up    up
at-1/0/1                up    up
dsc                     up    up
fxp0                    up    up
fxp0.0                  up    up   inet     192.168.71.249/21
fxp1                    up    up
fxp1.0                  up    up   inet     10.0.0.4/8
                                   tnp      4
gre                     up    up
ipip                    up    up
lo0                     up    up
lo0.0                   up    up   inet     10.0.1.4            --> 0/0
                                            127.0.0.1           --> 0/0
lo0.16385               up    up   inet    
                                   
lsi                     up    up
mtun                    up    up

[Contents] [Prev] [Next] [Index] [Report an Error]