[Contents] [Prev] [Next] [Index] [Report an Error]

show interfaces (GRE)

Syntax

show interfaces interface-type
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display status information about the specified generic routing encapsulation (GRE) interface.

Options

interface-type — On M-series and T-series routing platforms, the interface type is gr-fpc/pic/port. On the J-series routing platform, the interface type is gr-pim/0/port.

brief | detail | extensive | terse — (Optional) Display brief interface information.

descriptions — (Optional) Display interface description strings.

media — (Optional) Display media-specific information about network interfaces.

snmp-index snmp-index — (Optional) Display information for the specified SNMP index of the interface.

statistics — (Optional) Display static interface statistics.

Required Privilege Level

view

List of Sample Output

show interfaces (GRE)
show interfaces brief (GRE)
show interfaces detail (GRE)
show interfaces extensive (GRE)

Output Fields

Table 131 lists the output fields for the show interfaces (GRE) command. Output fields are listed in the approximate order in which they appear.

Table 131: GRE show interfaces Output Fields

Field Name

Field Description

Level of Output
Physical Interface 

Physical interface

Name of the physical interface.

All levels

Enabled

State of the interface. Possible values are described in Enabled Field.

All levels

Interface index

Physical interface's index number, which reflects its initialization sequence.

detail extensive none

SNMP ifIndex

SNMP index number for the physical interface.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Type

Type of interface.

All levels

Link-level type

Encapsulation used on the physical interface.

All levels

MTU

MTU size on the physical interface.

All levels

Speed

Speed at which the interface is running.

All levels

Hold-times

Current interface hold-time up and hold-time down, in milliseconds.

detail extensive

Device Flags

Information about the physical device. Possible values are described in Device Flags.

All levels

Interface Flags

Information about the interface. Possible values are described in Interface Flags.

All levels

Input rate

Input rate in bits per second (bps) and packets per second (pps).

None specified

Output rate

Output rate in bps and pps.

None specified

Statistics last cleared

Time when the statistics for the interface were last set to zero.

detail extensive

Traffic statistics

Number and rate of bytes and packets received and transmitted on the physical interface.

  • Input bytes—Number of bytes received on the interface.
  • Output bytes—Number of bytes transmitted on the interface.
  • Input packets—Number of packets received on the interface.
  • Output packets—Number of packets transmitted on the interface.

detail extensive

Logical Interface 

Logical interface

Name of the logical interface.

All levels

Index

Logical interface index number, which reflects its initialization sequence.

detail extensive none

SNMP ifIndex

Logical interface SNMP interface index number.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support.

detail extensive

Flags

Information about the logical interface. Possible values listed in Logical Interface Flags describe general information about the logical interface.

GRE-specific information about the logical interface is indicated by the presence or absence of the following value in this field:

  • Reassemble-Pkts—If the Flags field includes this string, the GRE tunnel is configured to reassemble tunnel packets that were fragmented after tunnel encapsulation.

All levels

IP-Header

IP header of the logical interface. If the tunnel key statement is configured, this information is included in the IP Header entry.

GRE-specific information about the logical interface is indicated by the presence or absence of the following value in this field:

  • df—If the IP-Header field includes this string immediately following the 16 bits of identification information (that is, if :df: displays after the twelfth byte), the GRE tunnel is configured to allow fragmentation of GRE packets after encapsulation.

All levels

Encapsulation

Encapsulation on the logical interface.

All levels

Input packets

Number of packets received on the logical interface.

None specified

Output packets

Number of packets transmitted on the logical interface.

None specified

Traffic statistics

Total number of bytes and packets received and transmitted on the logical interface. These statistics are the sum of the local and transit statistics. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize.

  • Input rate—Rate of bits and packets received on the interface.
  • Output rate—Rate of bits and packets transmitted on the interface.

detail extensive

Local statistics

Statistics for traffic received from and transmitted to the Routing Engine. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize.

detail extensive

Transit statistics

Statistics for traffic transiting the router. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize.

detail extensive none

Protocol

Protocol family configured on the logical interface, such as iso, inet6, or mpls.

detail extensive none

protocol-family

Protocol family configured on the logical interface. If the protocol is inet, the IP address of the interface is also displayed.

brief

MTU

MTU size on the logical interface.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Route table

Routing table in which the logical interface address is located. For example, 0 refers to the routing table inet.0.

detail extensive

Flags

Information about the protocol family flags. Possible values are described in Family Flags.

detail extensive none

Addresses, Flags

Information about the address flags. Possible values are described in Addresses, Flags.

detail extensive none

Destination

IP address of the remote side of the connection.

detail extensive none

Local

IP address of the logical interface.

detail extensive none

Broadcast

Broadcast address of the logical interface.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Sample Output

show interfaces (GRE)

user@host> show interfaces gr-1/2/0 
Physical interface: gr-0/0/0, Enabled, Physical link is Up
  Interface index: 132, SNMP ifIndex: 26
  Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 800mbps
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)

  Logical interface gr-0/0/0.0 (Index 68) (SNMP ifIndex 47) 
    Flags: Point-To-Point SNMP-Traps 16384
    IP-Header 1.1.1.2:1.1.1.1:47:df:64:0000000000000000 Encapsulation: GRE-NULL
  Input packets : 0 
  Output packets: 0
    Protocol inet, MTU: 1476
      Flags: None
      Addresses, Flags: Is-Primary
        Local: 1.10.1.1

show interfaces brief (GRE)

user@host> show interfaces gr-1/2/0 brief 
Physical interface: gr-1/2/0, Enabled, Physical link is Up
  Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 800mbps
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps

  Logical interface gr-1/2/0.0 
    Flags: Hardware-Down Point-To-Point SNMP-Traps 0x4000
    IP-Header 10.10.0.2:10.10.0.1:47:df:64:0000000000000000
    Encapsulation: GRE-NULL
    inet  10.100.0.1/30   
    mpls

show interfaces detail (GRE)

user@host> show interfaces gr-1/2/0 detail 
Physical interface: gr-0/0/0, Enabled, Physical link is Up
  Interface index: 132, SNMP ifIndex: 26, Generation: 13
  Type: GRE, Link-level type: GRE, MTU: Unlimited, Speed: 800mbps
  Hold-times     : Up 0 ms, Down 0 ms
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps
  Statistics last cleared: Never
  Traffic statistics:
   Input  bytes  :                    0                    0 bps
   Output bytes  :                    0                    0 bps
   Input  packets:                    0                    0 pps
   Output packets:                    0                    0 pps

  Logical interface gr-0/0/0.0 (Index 68) (SNMP ifIndex 47) (Generation 8)
    Flags: Point-To-Point SNMP-Traps 16384
    IP-Header 1.1.1.2:1.1.1.1:47:df:64:0000000000000000 Encapsulation: GRE-NULL
    Traffic statistics:
     Input  bytes  :                    0
     Output bytes  :                    0
     Input  packets:                    0
     Output packets:                    0
    Local statistics:
     Input  bytes  :                    0
     Output bytes  :                    0
     Input  packets:                    0
     Output packets:                    0
    Transit statistics:
     Input  bytes  :                    0                    0 bps
     Output bytes  :                    0                    0 bps
     Input  packets:                    0                    0 pps
     Output packets:                    0                    0 pps
    Protocol inet, MTU: 1476, Generation: 12, Route table: 0
      Flags: None
      Addresses, Flags: Is-Primary
        Destination: Unspecified, Local: 1.10.1.1, Broadcast: Unspecified,
        Generation: 15

show interfaces extensive (GRE)

The output for the show interfaces extensive command is identical to that for the show interfaces detail command. For sample output, see show interfaces detail (GRE).

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.