show interfaces (Channelized T3 IQ)

Syntax

Release Information

Command introduced before JUNOS Release 7.4.

Description

(M-series and T-series routing platforms only) Display status information about the specified channelized T3 IQ interface.

Options

type-fpc/pic/port:channel — Interface type. With optional corresponding channel levels, the interface type can be one of the following:

• type-fpc/pic/port—For the physical channelized T3 IQ interface, type is ct3.
• type-fpc/pic/port:channel—For the clear channel, type is t3. At the first level of channelization, type can be ct1 or t1.
• type-fpc/pic/port:channel:channel—At the second level of channelization, type is ds.

brief | detail | extensive | terse — (Optional) Display the specified level of output.

descriptions — (Optional) Display interface description strings.

media — (Optional) Display media-specific information about network interfaces.

snmp-index snmp-index — (Optional) Display information for the specified SNMP index of the interface.

statistics — (Optional) Display static interface statistics.

Required Privilege Level

view

List of Sample Output

Output Fields

Table 114 lists the output fields for the show interfaces (Channelized T1 IQ and T3 IQ) command. Output fields are listed in the approximate order in which they appear.

Sample Output

Physical interface: ct3-0/0/1, Enabled, Physical link is Up
  Interface index: 30, SNMP ifIndex: 317, Generation: 29
  Link-level type: Controller, MTU: 4474, Clocking: Internal, Speed: T3,
  Loopback: None, FCS: 16, Mode: C/Bit parity, Parent: None
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps
  Link flags     : None
...

Physical interface: ct1-0/0/1:2, Enabled, Physical link is Up
  Interface index: 175, SNMP ifIndex: 1505, Generation: 174
  Link-level type: Controller, MTU: 1504, Clocking: Internal, Speed: T1,
  Loopback: None, FCS: 16, Framing: ESF, Parent: ct3-0/0/1 (Index 32)
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps
  Link flags     : None
...

Physical interface: ds-0/0/1:2:1, Enabled, Physical link is Up
  Interface index: 176, SNMP ifIndex: 1563, Generation: 175
  Link-level type: PPP, MTU: 1504, Clocking: Internal, Speed: 640kbps,
  Loopback: None, FCS: 16, Parent: ct1-0/0/1:2(Index 175)
  Device flags   : Present Running
  Interface flags: Point-To-Point SNMP-Traps
  Link flags     : Keepalives
...

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.