 |
Note: Although the MX-series uses DPCs, command syntax in this book is shown as fpc/pic/port for simplicity. |
On the MX-series routers when you display information about an interface, you specify the interface type, the slot in which the Dense Port Concentrator (DPC) is installed, the slot on the DPC in which the Physical Interface Card (PIC) is located, and the configured port number.
In the physical part of the interface name, a hyphen (—) separates the media type from the FPC number, and a slash (/) separates the DPC, PIC, and port numbers:
-
type-dpc/pic/port
|
Note: Although the MX-series uses DPCs, command syntax in this book is shown as fpc/pic/port for simplicity. |
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |