[Contents] [Prev] [Next] [Index] [Report an Error]

J-series Physical Interfaces

Table 11 lists the physical interfaces that are supported on the J-series routing platform.

Table 11: J-series Physical Interfaces

Physical Interface	Syntax	PIM
Asynchronous Transfer Mode-over-asymmetrical DSL (ATM-over-ADSL)	at-pim/0/port	ADSL (Annex A and B)
ATM-over-symmetric high-speed DSL (ATM-over-SHDSL)	at-pim/0/port	G.SHDSL (Annex A and B)
Channelized E1	ce1-pim/0/port	Dual-Port Channelized E1
Channelized T1	ct1-port/0/port	Dual-Port Channelized T1
B-channel Basic Rate Interface (BRI) D-channel Dialer	bc-pim/0/port br-pim/0/port dc-pim/0/portpim dlnumber	4-Port Integrated Services Digital Network (ISDN) BRI
E1	e1-pim/0/port	Dual-Port E1
E3	e3-pim/0/port	E3
Fast Ethernet	fe-pim/0/port	Dual-Port Fast Ethernet
Gigabit Ethernet	ge-pim/0/port	Gigabit Ethernet
Point-to-Point Protocol over Ethernet ()	pp0	Fast Ethernet
Serial (RS-232, RS-422/449, EIA-530, V.35, and X.21)	se-pim/0/port	Dual-Port Serial
T1	t1-pim/0/port	Dual-Port T1
T3	t3-pim/0/port	T3 (all)

Note: ADSL interfaces and SHDSL interfaces are supported on the J-series routing platform only. Both interfaces are configured over an underlying ATM interface. For more information, see ATM Interface Operational Mode Commands.

Note: Point-to-Point Protocol over Ethernet (PPPoE) interfaces (pp0) are supported on the J-series routing platform and the M120 Internet router only. A PPPoE interface is configured over an underlying Ethernet interface. For more information, see PPPoE Interface Operational Mode Commands.

[Contents] [Prev] [Next] [Index] [Report an Error]