 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- show system statistics tnp
- show system statistics tnp
- <all-lcc | lcc number | scc>
Command introduced before JUNOS Release 7.4.
Display system-wide Trivial Network Protocol (TNP) statistics.
all-lcc — (Routing matrix only) (Optional) Display system statistics for TNP for all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.
lcc number — (Routing matrix only) (Optional) Display system statistics for TNP for a specified T640 routing node (or line-card chassis) connected to a TX Matrix platform. Replace number with a value from 0 through 3.
scc — (Routing matrix only) (Optional) Display system statistics for TNP for the TX Matrix platform (or switch-card chassis).
By default, when you issue the show system statistics tnp command on a TX Matrix master Routing Engine, the command is broadcast to all the T640 master Routing Engines connected to it. Likewise, if you issue the same command on the TX Matrix backup Routing Engine, the command is broadcast to all the T640 backup Routing Engines that are connected to it.
view
Output field descriptions to be provided.
user@host> show system statistics tnp
tnp:
146742559 unicast packets received
0 broadcast packets received
0 fragmented packets received
0 hello packets dropped
0 fragments dropped
0 fragment reassembly queue flushes
0 hello packets received
0 control packets received
49670972 rdp packets received
337101 udp packets received
96734486 tunnel packets received
0 input packets discarded with no protocol
98375316 unicast packets sent
0 broadcast packets sent
0 fragmented packets sent
0 hello packets dropped
0 fragments dropped
0 hello packets sent
0 control packets sent
49670972 rdp packets sent
337101 udp packets sent
48367243 tunnel packets sent
0 packets sent with unknown protocol
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |