show system statistics esis

Syntax

Syntax (Routing Matrix)

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display system-wide End System-to-Intermediate System (ES-IS) statistics.

Options

all-lcc — (Routing matrix only) (Optional) Display system statistics for ES-IS for all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.

lcc number — (Routing matrix only) (Optional) Display system statistics for ES-IS for a specified T640 routing node (or line-card chassis) connected to a TX Matrix platform. Replace number with a value from 0 through 3.

scc — (Routing matrix only) (Optional) Display system statistics for ES-IS for the TX Matrix platform (or switch-card chassis).

Additional Information

By default, when you issue the show system statistics esis command on a TX Matrix master Routing Engine, the command is broadcast to all the T640 master Routing Engines connected to it. Likewise, if you issue the same command on the TX Matrix backup Routing Engine, the command is broadcast to all the T640 backup Routing Engines that are connected to it.

Required Privilege Level

view

List of Sample Output

Output Fields

Output field descriptions to be provided.

Sample Output

esis:
        0 total pkts received
        0 total packets consumed by protocol
        0 pdus received with bad checksum
        0 pdus received with bad version number
        0 pdus received with bad type field
        0 short pdus received
        0 bogus sdl size
        0 bad header length
        0 unknown or unsupported protocol
        0 no free memory in socket buffer
        0 send packets discarded
        0 sbappend failure
        0 mcopy failure
        0 ISO family not configured

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.