- show system statistics arp
- show system statistics arp
- <all-lcc | lcc number | scc>
Command introduced before JUNOS Release 7.4.
Display system-wide Address Resolution Protocol (ARP) statistics.
all-lcc — (Routing matrix only) (Optional) Display system-wide ARP statistics for all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.
lcc number — (Routing matrix only) (Optional) Display system statistics for ARP for a specified T640 routing node (or line-card chassis) connected to a TX Matrix platform. Replace number with a value from from 0 through 3.
scc — (Routing matrix only) (Optional) Display system statistics for ARP for the TX Matrix platform (or switch-card chassis).
By default, when you issue the show system statistics arp command on a TX Matrix master Routing Engine, the command is broadcast to all the T640 master Routing Engines connected to it. Likewise, if you issue the same command on the TX Matrix backup Routing Engine, the command is broadcast to all the T640 backup Routing Engines that are connected to it.
view
Output field descriptions to be provided.
user@host> show system statistics arp
arp:
44134607 datagrams received
2 ARP requests received
2026 ARP replies received
3152 resolution requests received
0 unrestricted proxy requests
0 received proxy requests
0 proxy requests not proxied
0 with bogus interface
787 with incorrect length
712 for non-IP protocol
0 with unsupported op code
0 with bad protocol address length
0 with bad hardware address length
0 with multicast source address
7603 with multicast target address
0 with my own hardware address
14218490 for an address not on the interface
0 with a broadcast source address
0 with source address duplicate to mine
29905774 which were not for me
0 packets discarded waiting for resolution
6 packets sent after waiting for resolution
17790 ARP requests sent
2 ARP replies sent
0 requests for memory denied
0 requests dropped on entry
0 requests dropped during retry