show system reboot

Syntax

Syntax (Routing Matrix)

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display pending system reboots or halts.

Options

none — Display pending reboots or halts on the active Routing Engine.

all-lcc — (Routing matrix only) (Optional) Display halt or reboot request information for all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.

lcc number — (Routing matrix only) (Optional) Display halt or reboot request information for a specific T640 routing node (or line-card chassis) that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.

scc — (Routing matrix only) (Optional) Display halt or reboot request information for the TX Matrix platform (or switch-card chassis).

both-routing-engines — (Optional) Display halt or reboot request information on both Routing Engines.

Additional Information

By default, when you issue the show system reboot command on a TX Matrix master Routing Engine, the command is broadcast to all the T640 master Routing Engines connected to it. Likewise, if you issue the same command on the TX Matrix backup Routing Engine, the command is broadcast to all the T640 backup Routing Engines that are connected to it.

Required Privilege Level

maintenance

List of Sample Output

Output Fields

Output field descriptions to be provided.

Sample Output

reboot requested by root at Wed Feb 10 17:40:46 1999
[process id 17885]

lcc0-re0:
--------------------------------------------------------------------------
No shutdown/reboot scheduled.

lcc2-re0:
--------------------------------------------------------------------------
No shutdown/reboot scheduled.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.