[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
show class-of-service interface-set
Syntax
-
show class-of-service interface-set
- <interface-set-name>
Release Information
Command introduced in JUNOS Release 9.4.
Description
Display the configured shaping rate and the adjusted
shaping rate for each logical interface set configured for hierarchical
class of service (CoS).
Options
none — Display CoS associations
for all logical interface sets.
interface-set-name — (Optional) Display CoS associations for the specified
interface set.
Required Privilege Level
view
List of Sample Output
show class-of-service interface-set
Output Fields
Table 161 lists the
output fields for the show class-of-service interface-set command. Output fields are listed in the approximate order in which
they appear.
Table 161: show class-of-service
interface-set Output Fields
|
Field Name
|
Field Description
|
|
Interface-set
|
Name of a logical interface set composed of one or more
logical interfaces for which hierarchical scheduling is enabled.
|
|
Index
|
Index of this interface set or the internal index of
this object.
|
|
Physical interface
|
Name of a physical interface.
|
|
Queues supported
|
Number of queues you can configure
on the interface.
|
|
Queues in use
|
Number of queues currently configured.
|
|
Output traffic control profile
|
Name of the output traffic-control profile attached to
the logical interface set.
|
|
Adjusting application
|
Name of the application that communicates shaping-rate
adjustment information to the JUNOS class-of-service daemon (cosd) on the broadband services router (BSR). The BSR uses the information
from this application to perform shaping-rate adjustments on the scheduler
node that manages the interface set. The adjusting application can
be one of the following: ancp LS-0 — JUNOS Access
Node Control Profile daemon (ancpd) that performs shaping-rate
adjustments on schedule nodes that are logical interface sets configured
to represent subscriber local loops. When the synchronization speed
of the DSL line changes, ancpd communicates the local loop
speed to cosd over the default logical system, LS-0, and then the BSR throttles the shaping rate on the scheduler node
to the loop speed. |
|
Adjustment type
|
Type of shaping-rate adjustment performed by the BSR
on the scheduler node. The type of adjustment can be one of the following: absolute — The configured
shaping rate is adjusted by an absolute value as opposed to by a percentage
of the configured rate. |
|
Configured shaping rate
|
The maximum transmission rate on the physical interface
as configured by the output traffic-control profile attached to the
scheduler node.
|
|
Adjustment value
|
Value of the shaping-rate adjustment
information sent by the adjusting application to cosd.
|
Sample Output
show class-of-service interface-set
user@host> show class-of-service interface-set
example-ifset-ge-4/0/0-7
Interface-set: example-ifset-ge-4/0/0–7, Index: 8
Physical interface: ge-4/0/0, Index: 270
Queues supported: 8, Queues in use: 8
Output traffic control profile: example-tcp-basic-rate, Index: 11395
Adjusting application: ancp LS-0
Adjustment type: absolute
Configured shaping rate: 50000000
Adjustment value: 888000
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
