- show chassis spmb sibs
- show chassis spmb sibs
- <lcc number | scc>
Command introduced before JUNOS Release 7.4.
(T-series routing platforms only) Display Switch Processor Mezzanine Board (SPMB) Switch Interface Board (SIB) status information.
none — (Routing matrix only) Display the SIB status for the TX Matrix platform and its attached T640 routing nodes.
lcc number — (Routing matrix only) (Optional) Display SIB status information for a specified T640 routing node (or line-card chassis) that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.
scc — (Routing matrix only) (Optional) Display SIB status information for the TX Matrix platform (or switch-card chassis).
On a T-series routing platforms, you can use either this command or the show chassis sibs command to produce the same output. The show chassis sibs command is supported on the M320 router and on the T-series routing platforms.
view
Table 84 lists the output fields for the show chassis spmb sibs command. Output fields are listed in the approximate order in which they appear.
Table 84: show chassis spmb sibs Output Fields
user@host> show chassis spmb sibs
Slot State 0 Spare 1 Online 2 Online
user@host> show chassis spmb sibs
Slot State 0 Spare 1 Online 2 Empty 3 Online 4 Offline
user@host> show chassis spmb sibs
Slot State 0 Online 1 Online 2 Empty 3 Online 4 Offline
user@host> show chassis spmb sibs lcc 0
lcc0-re0: -------------------------------------------------------------------------- Slot State Uptime 0 Empty 1 Empty 2 Empty 3 Disconnected 8 days, 48 minutes, 58 seconds 4 Online 8 days, 48 minutes, 57 seconds
user@host> show chassis spmb sibs scc
scc-re0: -------------------------------------------------------------------------- Slot State Uptime 0 Empty 1 Empty 2 Empty 3 Offline 4 Online 8 days, 54 minutes, 1 second