 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- request system partition abort
- request system partition abort
- <all-lcc | lcc number | scc>
Command introduced before JUNOS Release 7.4.
Terminate a previously scheduled storage media partition operation. If the command is issued between the time of a partition request and a reboot, the partition request is aborted and the storage media is not affected.
all-lcc — (Routing matrix only) (Optional) Abort a previously scheduled partition operation on all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.
lcc number — (Routing matrix only) (Optional) Abort a previously scheduled partition operation on a specific T640 routing node that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.
scc — (Routing matrix only) (Optional) Abort a previously scheduled partition operation for only the TX Matrix platform (or switch-card chassis).
maintenance
request system partition hard-disk
When you enter this command, you are provided feedback on the status of your request.
user@host> request partition abort
The hard disk is no longer scheduled to be partitioned.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |