request chassis sib

Syntax

Syntax (Routing Matrix)

Release Information

Command introduced before JUNOS Release 7.4.

Description

(M320 routers and T-series routing platforms only) Control the operation of the specified Switch Interface Board (SIB).

Options

all-chassis — (Routing matrix only) Controls the operation of the SIB in the specified slot on the TX Matrix platform and on all T640 routing nodes.

lcc number — (Routing matrix only) T640 routing node (or line-card chassis) that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.

scc — (Routing matrix only) TX Matrix platform (or switch-card chassis).

offline — Take the SIB offline.

online — Bring the SIB online.

slot slot-number — SIB slot number. For the T640 routing node and a routing matrix, replace slot-number with a value from 0 through 4. For the T320 router, replace slot-number with a value from 0 through 2.

start-receiver number — (Routing matrix only) Start the SIB optical receiver. Replace  number with a value from 0 through 3.

stop-receiver number — (Routing matrix only) Stop the SIB optical receiver. Replace number with a value from 0 through 3.

Required Privilege Level

maintenance

Related Topics

show chassis sibs

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

Online initiated, use "show chassis sibs" to verify

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.