- request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number
- request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number
-
<lcc number>
Command introduced before JUNOS Release 7.4.
Control the operation of the Physical Interface Card (PIC).
![]() |
Note: The request chassis pic (offline | online) fpc-slot slot number pic-slot slot-number command is not supported for built-in PICs on MX-series routers. To view a list of built-in PICs on the router chassis, use the show chassis hardware command. |
offline — Take the PIC offline.
online — Bring the PIC online.
fpc-slot slot-number — Flexible PIC Concentrator (FPC) slot number. Replace slot-number with a value appropriate for your routing platform:
- user@host> request chassis pic fpc-slot 1
lcc 1 pic-slot 0 offline
- user@host> request chassis pic fpc-slot 9
pic-slot 0 offline
pic-slot slot-number — PIC slot number. For the M-series routing platform, the T640 routing node, and the routing matrix, it can be 0, 1, 2, or 3. On the MX960 router, slot-number corresponds to the slot number of the Packet Forwarding Engine. For the T320 router, it can be 0 or 1.
lcc number — (Routing matrix only) (Optional) Control the PIC in a specified T640 routing node that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.
maintenance
When you enter this command, you are provided feedback on the status of your request.
user@host> request chassis pic pic-slot
0 online fpc-slot 0
FPC 0, PIC 0 is already online