request chassis fpc

Syntax

Syntax (Routing Matrix)

Release Information

Command introduced before JUNOS Release 7.4.

Description

(M20, M40, M40e, M120, M160, M320, and MX-series routers, and T-series routing platforms only) Control the operation of the Flexible PIC Concentrator (FPC).

Options

offline — Take the FPC offline.

online — Bring the FPC online.

restart — Restart the FPC.

slot slot-number — FPC slot number:

• M20 router—0 through 3.
• M120 router—0 through 5.
• MX240 router—0 through 2. On the MX240 router, slot-number corresponds to the Dense Port Concentrator (DPC) slot number.
• MX480 router—0 through 5. On the MX480 router, slot-number corresponds to the Dense Port Concentrator (DPC) slot number.
• MX960 router—0 through 11. On the MX960 router, slot-number corresponds to the Dense Port Concentrator (DPC) slot number.
• Routing matrix only—If you specify the number of the T640 routing node by using the lcc number option (the recommended method), replace slot-number with a value from 0 through 7. Otherwise, replace slot-number with a value from 0 through 31. For example, the following commands have the same result:

  user@host> request chassis fpc lcc 1 slot 1 offline

  user@host> request chassis fpc slot 9 offline

• Other routing platforms—0 through 7.

lcc number — (Routing matrix only) (Optional) Control the FPC in a specified T640 routing node that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.

Required Privilege Level

maintenance

Related Topics

show chassis fpc

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

FPC 0 already online

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.