clear services stateful-firewall sip-call

Syntax

Release Information

Command introduced in JUNOS Release 7.4.

Description

Clear Session Initiation Protocol (SIP) call information in stateful firewall flows.

Options

none — Clear stateful firewall statistics for all interfaces and all service sets.

application-protocol — (Optional) Clear information about one of the following application protocols:

• bootp—(SIP only) Bootstrap protocol
• dce-rpc—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols
• dce-rpc-portmap—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols portmap service
• dns—(SIP only) Domain Name System protocol
• exec—(SIP only) Exec
• ftp—(SIP only) File Transfer Protocol
• h323—H.323 standards
• icmp—Internet Control Message Protocol
• iiop—Internet Inter-ORB Protocol
• login—Login
• netbios—NetBIOS
• netshow—NetShow
• realaudio—RealAudio
• rpc—Remote Procedure Call protocol
• rpc-portmap—Remote Procedure Call protocol portmap service
• rtsp—Real-Time Streaming Protocol
• shell—Shell
• sip—Session Initiation Protocol
• snmp—Simple Network Management Protocol
• sqlnet—SQLNet
• tftp—Trivial File Transfer Protocol
• traceroute—Traceroute
• winframe—WinFrame

destination-port destination-port — (Optional) Clear information for a particular destination port. The range of values is 0 to 65535.

destination-prefix destination-prefix — (Optional) Clear information for a particular destination prefix.

interface interface-name — (Optional) Clear information for a particular adaptive services interface. On M-series and T-series routing platforms, the interface-name can be sp-fpc/pic/port or rspnumber. On the J-series routing platform, the interface-name is sp-pim/0/port.

protocol — (Optional) Clear information about one of the following IP protocol types:

• ah—IPSec Authentication Header protocol
• egp—An exterior gateway protocol
• esp—IPSec Encapsulating Security Payload protocol
• gre—A generic routing encapsulation protocol
• icmp—Internet Control Message Protocol
• igmp—Internet Group Management Protocol
• ipip—IP-within-IP Encapsulation Protocol
• ipv6—IPv6 within IP
• ospf—Open Shortest Path First protocol
• pim—Protocol Independent Multicast protocol
• rsvp—Resource Reservation Protocol
• sctp—Stream Control Protocol
• tcp—Transmission Control Protocol
• udp—User Datagram Protocol

service-set service-set — (Optional) Clear information for a particular service set.

source-port source-port — (Optional) Clear information for a particular source port. The range of values is 0 to 65535.

source-prefix source-prefix — (Optional) Clear information for a particular source prefix.

Required Privilege Level

view

Related Topics

show services stateful-firewall sip-call

List of Sample Output

Output Fields

Table 256 lists the output fields for the clear services stateful-firewall sip-call command. Output fields are listed in the approximate order in which they appear.

Table 256: clear services stateful-firewall sip-call Output Fields

Sample Output

Interface   Service set                                        SIP calls removed
sp-0/3/0    test_sip_777                                                       1

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.