 |
Note: You can skip this section if you have chosen to enable authentication through RADIUS or TACACS+, as described in the chapter about system authentication in the JUNOS System Basics Configuration Guide. |
The configuration management server needs an SSH public/private key pair, a text-based password, or both before it can authenticate with the NETCONF server. A public/private key pair is sufficient if the account is used only to connect to the NETCONF server through SSH. If the account is also used to access the router in other ways (for login on the console, for example), it must have a text-based password. The password is also used (the SSH server prompts for it) if key-based authentication is configured but fails.
|
Note: You can skip this section if you have chosen to enable authentication through RADIUS or TACACS+, as described in the chapter about system authentication in the JUNOS System Basics Configuration Guide. |
Follow the instructions in the appropriate section:
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |