 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
Purpose
Display information about all gates on a VPG including statistics for the gates, RTCP sender and RTCP receiver statistics, and rate-limiting statistics for the gates, using the show services pgcp gates gateway gateway-name extensive command.
Action
user@host> show services pgcp gates
gateway vpg-1 extensive
Packet gateway configuration: Name : vpg-1 IP address : 2.0.0.2 Port : 2944 Status : In-Service (Registered) Gate information: ================ Gate id: 4295033088 Gate state: active Direction: A->B Action: forward Remote source address: * Remote source port: * Remote destination address: 4.0.0.1 Remote destination port: 5060 Local source address: [4.99.99.20] Local source port: [5060] Local destination address: 2.99.99.20 Local destination port: 5060 Transport: udp RTCP: Off Latch: none DSCP: 0x00 (Effective 0) Policing: On Gate SDR : 10000 bytes per second Gate PDR : 10000 bytes per second Gate MBS : 1000 bytes RTCP SDR : 500 bytes per second RTCP PDR : 500 bytes per second RTCP MBS : 1000 bytes Fast update filter: Off Gate information: ================ Gate id: 4295033089 Gate state: active Direction: B->A Action: forward Remote source address: * Remote source port: * Remote destination address: 2.0.0.1 Remote destination port: 5060 Local source address: [2.99.99.20] Local source port: [5060] Local destination address: 4.99.99.20 Local destination port: 5060 Transport: udp RTCP: Off Latch: none DSCP: 0x00 (Effective 0) Policing: On Gate SDR : 10000 bytes per second Gate PDR : 10000 bytes per second Gate MBS : 1000 bytes RTCP SDR : 500 bytes per second RTCP PDR : 500 bytes per second RTCP MBS : 1000 bytes Fast update filter: Off
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |