[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Inactivity Timer Package

Step-by-Step Procedure

To configure the inactivity timer package:

  1. Access the inactivity timeout configuration for a VPG.
    [edit services pgcp]
    user@host#edit gateway vpg-1 h248-properties inactivity-timer inactivity-timeout
  2. Specify whether the PG detects inactivity timeout events received from the PGC by default.
    [edit services pgcp gateway vpg-1 h248-properties inactivity-timer inactivity-timeout]
    user@host#set detect
  3. Specify a default value for the maximum inactivity time. The default value is used if the PGC requests that the PG detect the inactivity timeout event, but the PGC does not set a value for the maximum inactivity time.
    [edit services pgcp gateway vpg-1 h248-properties inactivity-timer inactivity-timeout]
    user@host#set maximum-inactivity-time default 24000
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.