[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Rate-Limiting for Voice Calls

Step-by-Step Procedure

To configure rate-limiting for voice calls:

  1. Access the configuration of the H.248 traffic-management properties.
    [edit services pgcp gateway vpg-1]
    user@host#edit h248-properties traffic-management
  2. Configure a peak data rate for all gate streams.
    [edit services pgcp gateway vpg-1 h248-properties traffic-management]
    user@host#set peak-data-rate-default 2000000
  3. Configure a separate peak data rate for RTCP gate streams.
    [edit services pgcp gateway vpg-1 h248-properties traffic-management]
    user@host#set peak-data-rate rtcp fixed-value 100000
  4. Configure a sustained data rate for all gate streams.
    [edit services pgcp gateway vpg-1 h248-properties traffic-management]
    user@host#set sustained-data-rate default 3000000
  5. Configure a sustained data rate for RTCP gate streams.
    [edit services pgcp gateway vpg-1 h248-properties traffic-management]
    user@host#set sustained-data-rate rtcp fixed-value 200000
  6. Configure a maximum burst size for all gate streams.
    [edit services pgcp gateway vpg-1 h248-properties traffic-management]
    user@host#set max-burst-size default 3000000
  7. Configure a maximum burst size for RTCP gate streams.
    [edit services pgcp gateway vpg-1 h248-properties traffic-management]
    user@host#set max-burst-size rtcp percentage 1000

Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.