[Contents] [Prev] [Next] [Index] [Report an Error]

Activating and Configuring Hanging Termination Detection

The timerx timer sets the interval between the last message exchanged for a specific termination and when the PG sends a notification to the PGC. The timer resets when a message is exchanged on the termination and when the PG notifies the PGC. For example, if the PG notifies the PGC that there has been no activity on the termination, and the PGC does not modify or subtract the indicated termination, the PG again waits the specified time, and sends another notification if there still has not been activity on the termination.

Setting the timer to a value other than zero (0) activates hanging termination detection on new and modified terminations. The timer value that you set is the default value, and it can be overridden by H.248 messages sent from the PGC. To set the timer:



[edit services pgcp gateway vpg-1 h248-properties hanging-termination-detection]
user@host#set timerx 30

[Contents] [Prev] [Next] [Index] [Report an Error]