[Contents] [Prev] [Next] [Index] [Report an Error]

Starting the JUNOScope Software Manually

The JUNOScope software is automatically started after you install or upgrade the JUNOScope software. If you stop the JUNOScope software, you can restart it using the following procedure.

To start the JUNOScope software after running the installation program, follow these steps:

  1. Type the following command:
    hostname% <install-directory>/jtk/rc.d/jtk start
  2. Connect to the JUNOScope software server and log in. For more information, see Connecting to the JUNOScope Software from a Client Workstation and Logging In .

If you reboot the UNIX workstation on which you installed the JUNOScope software, the JUNOScope software will not start automatically. For more information, see Starting the JUNOScope Software Automatically at Boot Time.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.