[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Pseudowires — Filter and Test l2circuit Pseudowires (View
Results) Dialog Box
Description
This dialog box lists out the details of the source
and destination end points of the selected pseudowire.
Click Provisioning > Pseudowires > Filter and Test
l2circuit Pseudowires and click OK after specifying the criteria,
and then click View after selecting one or more pseudowires.
Permissions
Superuser, read-write, read-only
Dialog Elements
Virtual Circuit Details
-
Virtual Circuit Id: field— Displays the
identify number of the virtual circuit
Source Endpoint Details
-
Source Device: field— Displays the name
of the source device
-
Maximum Cell Concatenation: field— Displays
the maximum number of ATM cells that can be concatenated before the
packet switched network (PSN) packet is sent out.
-
Control Word: field— Displays whether the
control word was enabled or disabled.
-
Encapsulation: field— Displays the encapsulation
type.
-
Bandwidth: field— Displays the bandwidth
that was specified for the pseudowire.
-
Mode: field— Displays the mode that was
specified for the pseudowire.
-
VCI: field— Displays the virtual circuit
identifier of the pseudowire. This is only applicable for ATM pseudowires.
-
Sequence Number Switchover: field— Displays
whether the sequence number switchover was enabled or disabled.
-
Timeout: field— Displays the maximum time
that the device should wait for the specified number of ATM cells
to arrive for concatenation.
-
Sequence Number Check: field— Displays
whether the sequence number check was enabled or disabled.
-
VPI: field— Displays the virtual path identifier
of the pseudowire. This is only applicable for ATM pseudowires.
Destination Endpoint Details
-
Destination Device: field— Displays the
name of the destination device
-
Maximum Cell Concatenation: field— Displays
the maximum number of ATM cells that can be concatenated before the
packet switched network (PSN) packet is sent out.
-
Control Word: field— Displays whether the
control word was enabled or disabled.
-
Encapsulation: field— Displays the encapsulation
type.
-
Bandwidth: field— Displays the bandwidth
that was specified for the pseudowire.
-
Mode: field— Displays the mode that was
specified for the pseudowire.
-
VCI: field— Displays the virtual circuit
identifier of the pseudowire. This is only applicable for ATM pseudowires.
-
Sequence Number Switchover: field— Displays
whether the sequence number switchover was enabled or disabled.
-
Timeout: field— Displays the maximum time
that the device should wait for the specified number of ATM cells
to arrive for concatenation.
-
Sequence Number Check: field— Displays
whether the sequence number check was enabled or disabled.
-
VPI:field— Displays the virtual path identifier
of the pseudowire. This is only applicable for ATM pseudowires.
Previous button— Click this button to
go back to the Filter and Test L2circuit Pseudowire dialog box.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
