Pseudowires — Filter and Test l2circuit Pseudowires Dialog Box

Use the Filter and Test l2circuit Pseudowires dialog box to filter pseudowires based on one of the many criteria provided and test them.

Click Provisioning > Pseudowires > Filter and Test l2circuit Pseudowires.

Superuser, read-write, read-only

The following criteria are available for filtering pseudowires and displaying results:

All Pseudowires—Displays all pseudowires.
Select Device Groups—Displays pseudowires configured on the selected device groups. Press the Shift key to select multiple device groups.
Select Devices—Displays pseudowires configured on the selected devices. Press the Shift key to select multiple devices. You must select at least two devices.
Select Pseudowire Endpoints—Select pseudowire endpoints from the drop-down list boxes. Displays the pseudowires configured between the selected endpoints.
Virtual Circuit ID—Displays the pseudowires with the Virtual Circuit ID you enter.

OK button—Click OK after specifying the filtering criterion to display results.