Monitoring Operations Run in Real Time

When you run an operation in real time using the Now schedule option, the View Status Records dialog box appears displaying the results of each task that was run.

To view the status of operations run in real time, follow these steps:

1. From the JUNOScope main window, click Settings > Saved Operations. The Saved Operations dialog box appears.
2. Click the Run link or the operation that you want to run. The Run Saved Operation dialog box appears.
3. Click the Now option button, and click OK to run the operation immediately in real time. The View Status Records dialog box appears.

The View Status Records dialog box shows the status of each task that ran in a simple or compound operation. At a glance, you can see the operation name, operation type, the device name on which the operation ran, the user who ran the operation, operation status, start time, last updated time, and an operation status message.

The View Status Records dialog box refreshes every 10 seconds.

The status of a compound operation is successful when all tasks within it have run successfully.

Since a task can contain multiple Operations, in this step the operations in this task will be listed down. You can now select the operation you wish to redo and click on next.

JUNOScope displays two list boxes one with all the devices on which the operation was successful and the other list box will contain failed devices. You can select the devices on which you wish to redo the operation from either of the list boxes.

The Redo Wizard always displays a device list even if during a task creation device group was selected. Only devices on which the operation failed (ERROR, ABORTED) or successful are listed. Devices on which the operation is in any other state is not be listed. Devices on which the Operation was executed but are deleted from JUNOScope will be excluded from the list boxes.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.