| |
Router Summary Information
|
Displays the current alarms, system uptime, and interface status
information.
|
|
ASP
|
Stateful Firewall Flows
|
Displays the Adaptive Services (AS) Physical Interface Card
(PIC) flow table entries.
|
| |
Stateful Firewall Flow Count
|
Displays a count of the matching flow table entries.
|
| |
Stateful Firewall Conversations
|
Displays stateful firewall conversation information.
|
| |
NAT Pool Information
|
Displays Network Address Translation (NAT) pool information.
|
| |
Service Set Memory Usage
|
Displays adaptive services interface memory utilization.
|
| |
Service Set CPU Usage
|
Displays service interface CPU utilization as a percentage.
|
|
BGP
|
BGP Neighbor Information
|
Displays information about Border Gateway Protocol (BGP) neighbors.
Click a BGP neighbor for a detailed view.
|
| |
BGP Summary
|
Displays a summary of BGP and neighbor information.
|
|
Chassis
|
Alarm Status
|
Displays information about the current alarms, including alarm
time, severity level, and description.
|
| |
Craft Interface Output
|
For routers with a craft interface, shows the operational status
information that is currently displayed.
|
| |
Environment Information
|
Displays environmental information about the router chassis,
including temperature and information about the fans, power supplies,
and Routing Engine. The command output displays component environmental
status colors. Green is OK, yellow is caution, red is alarm status.
|
| |
Hardware Summary
|
Displays a list of all the router hardware components, including
the revision level, part number, serial number, and description. Click
a hardware component for more specific hardware information.
|
| |
Routing Engine Information
|
Displays operational information about the Routing Engine.
|
|
Interfaces
|
Interface Information
|
Displays operational status information about all router interfaces.
Click an interface name to view more detailed information about that
interface.
|
|
IS-IS
|
IS-IS Adjacency Information
|
Displays information about Intermediate System-to-Intermediate
System (IS-IS) neighbors.
|
| |
IS-IS Interface Information
|
Displays status information about the interfaces on which IS-IS
is configured.
|
|
LDP
|
LDP Database
|
Displays entries in the Label Distribution Protocol (LDP) label
database.
|
| |
LDP Interfaces
|
Displays the status of each interface on which LDP is enabled.
|
| |
LDP Neighbor
|
Displays a list of LDP neighbors.
|
| |
LDP Path
|
Displays the label-switched paths (LSPs) that the LDP created.
|
| |
LDP Route
|
Displays the entries in the LDP internal topology table. The
internal topology table contains routes from inet.0 and inet.3 and is used when binding labels to Forwarding Equivalence
Classes (FECs).
|
| |
LDP Session
|
Displays information about LDP sessions.
|
| |
LDP Statistics
|
Displays LDP statistics.
|
|
MPLS
|
MPLS LSP Information
|
Displays information about configured and active dynamic LSPs
in which this router participates.
|
| |
MPLS LSP Statistics
|
Displays statistics about configured and active dynamic LSPs
in which this router participates.
|
| |
MPLS LSP
|
Displays information about configured and active dynamic Multiprotocol
Label Switching (MPLS) LSPs in which this router participates.
|
| |
MPLS Path
|
Displays the named paths used in dynamic MPLS that have been
configured on this router.
|
| |
MPLS Interface
|
Displays information about interfaces on which MPLS is enabled.
MPLS is enabled on an interface when the interface is configured in
both the mpls and interface sections of the configuration
hierarchy (with the set protocol mpls interface
interface-name and set interface interface-name
unit 0 family mpls statements, respectively).
|
| |
MPLS OSPF
|
Displays MPLS Constrained Shortest Path First (CSPF) statistics.
|
|
Multicast
|
Multicast Route
|
Displays the entries in the multicast forwarding table. You
can display similar information with the show route table inet.1 command.
|
| |
Multicast RPF
|
Displays information about multicast reverse-path forwarding
(RPF) calculations.
|
| |
Multicast Statistics
|
Displays multicast statistics. The input and output interface
multicast statistics are consistent, but not timely. They are constructed
from the forwarding statistics, which are gathered at 30-second intervals.
Show Multicast Statistics will always lag true counts by up to 30
seconds.
|
| |
Multicast Usage
|
Displays usage information about the 10 most active Distance
Vector Multicast Routing Protocol (DVMRP) or Protocol Independent
Multicast (PIM) groups.
|
|
OSPF
|
OSPF Database
|
Displays the entries in the Open Shortest Path First (OSPF)
link-state database, including information about link-state advertisement
(LSA) packets.
|
| |
OSPF Interface Information
|
Displays status information about the interfaces on which OSPF
is configured.
|
| |
OSPF Neighbor Information
|
Displays information about OSPF neighbors.
|
| |
OSPF Route
|
Displays the entries in the OSPF routing table.
|
| |
OSPF Statistics
|
Displays OSPF statistics.
|
|
PIM
|
PIM Interfaces
|
Displays information about the interfaces on which PIM is configured.
|
| |
PIM Join
|
Displays information about PIM groups.
|
| |
PIM Neighbors
|
Displays information about PIM neighbors.
|
| |
PIM RPS
|
Displays information about PIM rendezvous points (RPs).
|
| |
PIM Source
|
Displays information about the PIM source RPF state.
|
| |
PIM Statistics
|
Displays PIM statistics.
|
|
Route
|
Display Route Summary
|
Displays summary statistics about the entries in the routing
table.
|
|
RSVP
|
RSVP Interface Information
|
Displays the status for each interface on which the Resource
Reservation Protocol (RSVP) is enabled, and displays packet statistics
for each interface.
|
| |
RSVP Interface Details
|
Displays detailed status for each interface on which RSVP is
enabled, and displays packet statistics for each interface.
|
| |
RSVP Neighbor Information
|
Displays a list of RSVP neighbors learned dynamically when exchanging
RSVP packets. Once a neighbor is learned, it is never removed from
the list of RSVP neighbors.
|
| |
RSVP Session Information
|
Displays information about RSVP sessions.
|
| |
RSVP Version Information
|
Displays information about the RSVP protocol settings, such
as the version of the RSVP software, the refresh timer and keep multiplier,
and local RSVP graceful restart capabilities on an LSP.
|
| |
RSVP Interface
|
Displays the status of each interface on which RSVP is enabled,
and displays packet statistics for each interface.
|
| |
RSVP Neighbor
|
Displays a list of RSVP neighbors that were learned dynamically
when exchanging RSVP packets. Once a neighbor is learned, it is never
removed from the list of RSVP neighbors.
|
| |
RSVP Session
|
Displays information about RSVP sessions.
|
| |
RSVP Statistics
|
Displays RSVP packet and error statistics.
|
| |
RSVP Version
|
Displays information about the RSVP protocol settings, such
as the version of the RSVP software, the refresh timer and keep multiplier,
and local RSVP graceful restart capabilities on an LSP.
|
|
System
|
Storage Capacity
|
Displays statistics about the amount of free disk space in the
router’s file systems.
|
| |
Uptime
|
Displays the current time and information about how long the
router, router software, and routing protocols have been running.
|
| |
Users
|
Displays information about the users who are currently logged
in to the router.
|
| |
Version Information
|
Displays the hostname and version information about the software
running on the router.
|
| |
System Commit
|
Displays the pending commit.
|
|
VPLS
|
VPLS Connection
|
Displays virtual private LAN service (VPLS) connection information.
|
|
VPN
|
l2circuit Connections
|
Displays status information about Layer 2 virtual circuits (VCs)
from the local provider edge (PE) router to its neighbors.
|
| |
12vpn Connections
|
Displays Layer 2 virtual private network (VPN) connections.
|
