Importing LSP Paths

You can import LSP Paths which you have earlier exported and saved.

To import an LSP Path, follow these steps:

1. Click Import in the Configure LSP Paths dialog box. The Import LSP Paths dialog box appears.

   

2. Click Browse. The Choose File dialog box appears.
3. Navigate to the location of the file that you want to import and choose the file to be imported.
4. Select one of the following option buttons:
   • Ignore—(Default) If there are conflicting Path names in the imported record and an existing record on the JUNOScope server, the existing record on the JUNOScope server takes precedence over the imported record. The imported record is ignored and the existing record is retained without any change. Any imported record that does not exist in the JUNOScope server is inserted.
   • Merge—If the same Path name is present in the existing record on the JUNOScope server and in the imported record, the imported record is merged with the existing record and the path information is augmented as necessary. In such cases, the fields of the imported record take precedence over the fields of the existing record. Any imported record that does not exist in the JUNOScope server is inserted.
   • Override—All imported records are inserted after deleting the existing records on the JUNOSCope server. Before the override operation occurs, a message window appears with the following confirmation prompt: “ The import with override option will delete all the existing records. Do you want to continue?” Select Yes to continue. If you want to retain the existing records on the JUNOScope server, select. No.
5. Click Import.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.