Archiving an Unmatched Configuration

JUNOScope associates a transferred configuration to a device based on the file name of the transferred configuration. If JUNOScope is not able to match the file name of the transferred configuration to any device, the configuration will be stored in the archive as an unmatched configuration. You can select a transferred configuration that could not be matched to any of the devices managed in JUNOScope, view the configuration file, select a device, and archive the unmatched transferred configuration into its device archive. You must have superuser or read-write permission to archive unmatched configurations.

To archive unmatched configurations, follow these steps:

1. In the JUNOScope main window, click Configuration > Repository > Transfer on Commit > Archive Unmatched Configuration. The Select Unmatched Config dialog box appears.

   

2. Select the configuration you want to match from the Select Config drop-down list box and click Next. The View Config and Select Device dialog box appears.

   

3. Select the device to which you want to archive the unmatched configuration from the Archive to Device drop-down list box.
4. Click Next. The Confirm Selections dialog box appears.

   

5. Confirm that the selections for archiving unmatched configurations are correct and click Finish. The View Status dialog box shows the status of the archive operation.

   

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.