<clock-synchronization>

Usage

<clock-synchronization-information>
    <clock-synchronization>
        <clock-fru>clock-fru</clock-fru>
        <mastership-state>mastership-state</mastership-state>
        <signal-type>signal-type</signal-type>
        <switching-mode>switching-mode</switching-mode>
        <line-termination>line-termination</line-termination>
        <transmit>transmit</transmit>
        <validation-interval>validation-interval</validation-interval>
        <automatic-switching>automatic-switching</automatic-switching>
        <marked-as-failed-source-list>...</marked-as-failed-source-list>
        <synchronization-source-list>...</synchronization-source-list>
    </clock-synchronization>
</clock-synchronization-information>

Description

No documentation is available yet.

Contents

<automatic-switching>—Clock synchronization source switching: manual or automatic.

<clock-fru>—FRU on which clock module is present.

<line-termination>—How external signal is wired to redundant CBs.

<marked-as-failed-source-list>—No documentation is available yet.

<mastership-state>—Current state of mastership on this Routing Engine.

<signal-type>—Frequency for provided reference clocks.

<switching-mode>—Should system revert to higher priority valid source.

<synchronization-source-list>—No documentation is available yet.

<transmit>—Control whether diagnostic timing signal is transmitted.

<validation-interval>—Time between successive frequency measurements.